Login

WPLE

Overview Technical Data
Technical Data

Description

WPLE® is an angular planetary gearbox perfectly combinable with brushless motors of the SR and B series.
It is a very light but still extremely performing product, ideal for heavy production cycles thanks to the reduced friction bearing design and optimized lubrication.
A high level product at a fair and affordable price. 
Developed and produced in Germany by Neugart® for HDT.

Torque Data.

Nominal output torque     WPLE040 WPLE060 WPLE080 WPLE120 Rapp. STADI

    4.5 14 40 80 3 1
      6 19 53 105 4 1
Nominal output torque T2N Nm 7.5 24 67 130 5 1
      8.5 25 65 135 7 1
      6 18 50 120 8 1
      5 15 38 95 10 1
      16.5 44 130 210 9 2
      20 44 120 260 12 2
      18 44 110 230 15 2
      20 44 120 260 16 2
Nominal output torque T2N Nm 20 44 120 260 20 2


  18 40 110 230 25 2
      20 44 120 260 32 2
      18 40 110 230 40 2
      7,5 18 50 120 64 2
      20 44 110 260 60 3
      20 44 120 260 80 3
      20 44 120 260 100 3
      18 44 110 230 120 3
Nominal output torque T2N Nm 20 44 120 260 160 3
      18 40 110 230 200 3
      20 44 120 260 256 3
      18 40 110 230 320 3
      7,5 18 50 120 512 3
Max output torque     WPLE040 WPLE060 WPLE080 WPLE120 Rapp. STADI

    7 22 64 128 3 1
      10 30 85 168 4 1
Max. output torque T2max Nm 12 38 107 208 5 1
      13.5 40 104 216 7 1
      10 29 80 192 8 1
      8 24 61 152 10 1
      26 70 208 336 9 2
      32 70 192 416 12 2
      29 70 176 368 15 2
      32 70 192 416 16 2
Max. output torque
 T2max Nm 32 70 192 416 20 2


  29 64 176 368 25 2
      32 70 192 416 32 2
      29 64 176 368 40 2
      12 29 80 192 64 2
      32 70 176 416 60 3
      32 70 192 416 80 3
      32 70 192 416 100 3
      29 70 176 368 120 3
Max. output torque
 T2max Nm 32 70 192 416 160 3
      29 64 176 368 200 3
      32 70 192 416 256 3
      29 64 176 368 320 3
      12 29 80 192 512 3
Emergency stop torque     WPLE040 WPLE060 WPLE080 WPLE120 Rapp. STADI

    22.5 66 180 360 3 1
      28 86 240 474 4 1
Emergency stop torque. T2stop Nm 35 80 220 500 5 1
      26 80 178 340 7 1
      27 80 190 380 8 1
      25 70 170 430 10 1
      33 88 260 500 9 2
      40 88 240 520 12 2
      36 88 220 500 15 2
      40 88 240 520 16 2
Emergency stop torque.
 T2stop Nm 40 88 240 520 20 2


  36 80 220 500 25 2
      40 88 240 520 32 2
      36 80 220 500 40 2
      27 80 190 380 64 2
      40 88 220 520 60 3
      40 88 240 520 80 3
      40 88 240 520 100 3
      36 88 220 500 120 3
Emergency stop torque.
 T2stop Nm 40 88 240 520 160 3
      36 80 220 500 200 3
      40 88 240 520 256 3
      36 80 220 500 320 3
      27 80 190 380 512 3

Shaft load.

Output shaft loads     WPLE040 WPLE060 WPLE080 WPLE120
Forza radiale per 20.0000 h (6)(7) Fr20.000h
 N 200 400 750 1750  
Radial force for 20.000 h(6)(7)  Fa20.000h N 200 500 1000 2500  
Radial force for 30.000 h(6)(7)  Fr30.000h N 160 340 650 1500  

Axial force for 30.000 h(6)(7)

 Fa30.000h N 160 450 900 2100  
Static radial force(7)(8) Fr r Stat N 200 700 1250 2000  
Static axial force(7)(8) Fa Stat N 240 800 1600 3800  
Tilting moment for 20.000 h(6)(8) Mk20.000h Nm 5 14 31 101  
Tilting moment for 30.000 h(6)(8) Mk30.000h Nm 4 12 27 86  

Note:
(6) These values are based on an output shaft speed of n2=100 min-1
(7) Basewd on center of output shaft
(8) Other ( sometimes higher) values following changes to T2N, FTr, FTa and service life of bearing.

 

Moment of inertia     PLE040 PLE060 PLE080 PLE120 STADI

    0.032 - 0.049 0.221 - 0.376 0.917 - 1.409 1.849 - 3.204 1 
Mass moment of inertia J Kgcm2 0.032 - 0.049 0.223 - 0.378 0.931 - 1.424 1.919 - 3.397 2 

    0.032 - 0.048 0.223 - 0.240 0.931 - 1.368 1.919 - 3.175 3 

Dimensions.

Technical Data
Geometry     WPLE040 WPLE060 WPLE080 WPLE120 Rapp. STADI
Pitch circle diameter output
 D1   34 52 70 100    
Shaft diameter output D3 h7 10 14 20 25    
Shaft collar output D4
12 17 25 35    
Centering diameter output D5 h7  26 40 60 80    
Housing diameter D6   40 60 80 115    
Mounting thread x depth G1 4x M4x6 M5x8 M6x10 M10x16    

L1   110 147 184 249.5   1
Total length L1   123 159.5 201.5 277   2
  L1   135.5 172 219 304.5   3
Shaft length output  L3   26 35 40 55

Centering depth output L7 
2 3  3  4     
Min. overall height. L23   62 86 110 146    
Output shaft with feather key (DIN6885-1)

A 3x3x18 A 5x5x25 A 6x6x28 A 8x7x40    
Feather key width B1   3 5 6 8    
Shaft height including feather key H1   11.2 16 22.5 28    
Shaft length from shoulder L4   23 30 36 50    
Feather key length L5   18 25 28 40    
Distance from shaft end L6   2.5 2.5 4 5    
Center hole   Z   M3x9 M5x12.5 M6x16 M10x22