Servodrive with 400VAC three-phases power supply to control motors brushless, asynchronous and DCMP with powers up to 120kW.
Servodrive with 230VAC single and three-phases power supply to control motors brushless, asynchronous and DCMP with powers up to 3kW.
Servo drives 400 VAC three-phase power supply to control brushless, asynchronous and DC motors M. P. with powers up to 2kW.
Servo drives with single-phase and three-phase 230VAC power supply for the control of brushless, asynchronous and DC motors. M. P. with powers up to 2kW.
Sinusoidal digital servo drives powered from 20 to 60VDC for AC brushless motors and DC motors with powers up to 900W.
Bidirectional 4-quadrant analog drive for DC motor MP, powered from 20 to 110 VDC. For power up to 900W.
Motors in 4 shaft heights and different lengths for torques from 0,5 up to 34Nm
Motors in 3 axle heights with torques from 0.32 up to 3.2Nm
High torque density motors. Four shaft heights with torques from 4.7 up to 540Nm
Hollow shaft motor, suitable to accept a screw nut for ballscrew that respect the standard DIN 69051.
Planetary gearboxes that can be flanged with all HDT motors. Developed and produced in Germany by Neugart for HDT.
Planetary right angle gearboxes that can be flanged with all HDT motors.Developed and produced in Germany by Neugart for HDT.
Motori DC a campo avvolto su 5 altezze d'asse. Potenze da 2 fino a 102kW
PC interface software for NTT, TomCat and DGFox servo drives.