Overview MS04 MS06 MS08

Compact servomotors

Serie MS

MS serie.

The compact servomotors of the "MS" series are made with "concentreted" technology which allows a high torque density. Designed on 3 different frame sizes, MS04, MS06 and MS08 with pairs of 0.32Nm, 1.27Nm and 2.45 respectively at 3000rpm and powers of 100, 400 and 750W.

MS04

 

  Brushless servomotor with 40mm square frame, construction form B5.
One size with 100W power with 0.32Nm torque at 3000rpm.
Available with two windings suitable for drives for 400VAC, 230VAC and 60VDC networks.
Power and signal output with 45cm long cable.
Incremental encoder and resolver transducer. 
  Technical specs
MS06
 
  Brushless servomotor with 60mm square frame, construction form B5.
One size with 400W power with 1.27Nm torque at 3000rpm.
Available with two windings suitable for drives for 400VAC, 230VAC and 60VDC networks.
Power and signal output with 45cm long cable.
Incremental encoder and resolver transducer. 
  Technical specs
MS08
 
 

Brushless servomotor with 80mm square frame, construction form B5.
One size with 750W power with 2,45Nm torque at 3000rpm.
Available with two windings suitable for drives for 400VAC and 230VAC networks.
Power and signal output with 45cm long cable.
Incremental encoder and resolver transducer.. 

  Technical specs

Feedback.

The transducers mounted on the motor provide the servodrive with the information necessary to be able to precisely control the motor motion. The transducers used in the MS series are able to guarantee precision, repeatability and meet reliability and robustness criteria.

Resolver
  The resolver is an electromechanical device used in rotary applications to detect the speed, direction and position of a rotating shaft. Due to its construction structure it is certainly the most suitable transducer for harsh working environments and for this reason it is a favorite. Resolutions vary by drive and can be 16bit or 12bit.
  Specifiche Tecniche
Incremental encoder with Hall's sensors
 

The Incremental Encoder is an opto-electronic device applied to the motor rotor that provides relative, non-absolute position information measured in pulses per revolution.
The standard resolution of the incremental encoders adopted is 2500ppr. 

  Specifiche Tecniche

Parking brake

The parking brake is a permanent magnet or spring brake with a certain polarity. It is powered at 24 Vdc. To release the brake, the winding must be powered. In the absence of current, the armature is attracted by the force of the magnetic field generated by the permanent magnets towards the friction surface. In this way, frictional locking is obtained without play.When the brakes are new and work at high speed, the torque may be lower than the declared value.The brake fitted is a parking brake which can only allow a limited number of emergency braking, it must not be strictly used for continuous dynamic braking. Due to the power dissipated by the brake, it is recommended to derate the motor stall torque by 5%.

Specifiche Tecniche